Paintliners

Our road marking trucks are operated by one or two persons working in the truck-cabin’s safe and comfortable environment, from where all line marking is controlled by the LineController with remote controls like joystick and foot pedal. The road marking material is applied by paint guns mounted on hydraulically operated gun wagons, just in front of the rear wheels. Line marking is monitored from inside cabin by mirror and a monitor, while the driver keeps a straight line by means of an aiming bar in front of the truck. The lines made are stored in the LineController specified with line type and width.

bildet viser en maskin som striper opp veien
bildet viser en arbeidsbil

HIGH PRESSURE PAINT TRUCKS

Airless road marking machine for solvent or water based cold paint.
  • 18 ton / 2 axl truck: max capacity 3x 1000 litres cold paint, fluid bag system
  • 26 ton / 3 axl truck: max capacity 5x 1000 litres cold paint, fluid bag system
  • 32 ton / 4 axl truck: max capacity 6x 1000 litres cold paint, fluid bag system
  • Application speed of up to 20 km/h
  • Hydraulic powered air compressor 3-5 m3/min 8 bars.
  • Glass bead tank with capacities from 450 to 1700 litres
  • Hydraulic powered high pressure piston pumps.
  • Hydraulic gun-wagon on both sides, operated by a joystick from truck cabin
  • 1 - 4 airless paint guns (Line-width of 10-15cm each gun) and glass bead guns
  • Flowmeter with monitor for real time flow and accumulated consumption
  • Controllable aiming device (Multi-direction)
LINECONTROLLER >
bildet viser en arbeidsbil

LOW PRESSURE PAINT TRUCKS

low pressure road marking machine for solvent or water based cold paint.
  • 18 ton / 2 axl truck: max capacity 3x 1000 litres cold paint, fluid bag system
  • 26 ton / 3 axl truck: max capacity 5x 1000 litres cold paint, fluid bag system
  • 32 ton / 4 axl truck: max capacity 6x 1000 litres cold paint, fluid bag system
  • Application speed of up to 20 km/h
  • Hydraulic powered air compressor 3-5 m3/min 8 bars.
  • Glass bead tank with capacities from 450 to 1700 litres
  • Air driven diaphragm paint pump.
  • Hydraulic gun-wagon on both sides, operated by a joystick from truck cabin
  • 1 - 4 paint guns (Line-width of 10-15cm each gun) and glass bead guns
  • Flowmeter with monitor for real time flow and accumulated consumption
  • Controllable aiming device (Multi-direction)
LINECONTROLLER >
bildet viser en arbeidsbil

AIRPORT TRUCKS

We have developed a paint truck especially for the purpose of marking of runways and taxways on airports. It is operated by one person working in the truck-cabin safe and comfortable environment. The paint system has two separate paint gun wagons and is based on an airless system for environment friendly waterborne paints. The first gun wagon is placed on the left side between the front and rear axle and is mainly for painting curves on tax-ways etc. The second is placed on the left side behind the rear axle of the truck. It is connected to the main container, and is to be used mainly for the runways with 90 cm wide lines.
  • Main paint container: 1000 liter fluidbag (normally yellow)
  • Alternative color 1: 200 liter (for black/blue/red or white)
  • Alternative color 2: 200 liter (for black/blue/red or white)
  • Glass-bead container - 1x 650 liter
  • Paint pumps - 3x 25 liter /min. Max pressure 138 bar
  • Compressor - 1,84 m3/min (65 CFM)
  • Hydraulic valves - Danfoss pvg 32
  • Hydraulic gun-wagon on both sides, operated by a joystick from truck cabin
  • Paint capacity - 90cm line /350my - 5km/h. 15 cm line/350 my- 15 km/h
  • Controllable aiming device (Multi-direction)
LINECONTROLLER >

Contact